|
|
 |
 |
For treating 1 Kg of raw hair, 10 pcs of 100 g wefts, several pcs of top closures,
prepare 1,000 ml ( 1,000 grams) of warm water (40กษ) in a container (long enough for hair length) |
 |
put a JK-HairCoat, 3 ml into the water (1,000 ml) in the ratio of 3:1,000 - 0.3% solution, and
stir the mixture with a stirring stick to be mixed evenly without build-ups (pileup) for 10 seconds as fast as possible, |
 |
put (soak/immserse) hair into the JK-HairCoat solution for 10 seconds, 1 minute, 10 minutes, or 1 hour,
(even 1 day, no problem and no big difference will happen to the hair)
 |
| |
 |
have the hair dried in air (natural drying), in a heated room, in an oven (drying machine). |
 |
 |
 |
Please have the dried hair
cooled down for hours.
Please do not touch (pull, stretch, rub, hackle) the hair when the hair is (feels) warm after drying using an oven. |
| |
 If you wash the hair which is still wet (not dried) after JK-HairCoat treatment, the effect will be a little bit less and may not last long time. |
|
The proper water temperature is 40กษ (after hair is put in). Meanwhile, when hair is cold (20กษ, even 30กษ as well as lower than 10กษ),
you can use (mix) 45 or 50กษ of water because the hair will change the water's temperature when you put (place) the hair in the water.
The water used to condition hair with JohnKorea Haircoat (or, JK hairCoat) should have a pH of 7 (neutral water).
JK HairCoat reacts better in pure water with a pH of 8 or 9 (slightly alkaline water). |
You can
have many Kgs of hair (or many wigs) soaked/immersed (  ) in the solution
(mixture) for 10 seconds,
10 minutes, or 10 hours), and with a wide-tooth comb, please comb
the hair in (under) the solution to arrange hairs not tangled (and straightened in case of raw hair) before
drying work
For
treating 10 Kgs in the video 01, we used ( mixed) as follows;
1) Water(40กษ after hair is put in): 30 Liters (30 Kgs)
2) HairCoat(JK7882-SEV): 60 ml (60 gr)
3) Mixture Ratio: 0.2%
([ 60/30000 = 0.002 (0.2% Solution)] |
If we use 50 Liters of water, we put (mix) 100 ml of a HairCoat
for treating 10 Kgs or more of hair.
For treating
20 Kgs of hair with a solution
1) Water(40กษ after hair is put in): 50 or 80 Liters
2) HairCoat(JK7882-SEV) : 100 ml (100 gr)
3) Mixture Ratio: 0.2 ~ 0.125%
[ 100/50000 ~ 100/80000 = 0.002 ~0.00125 (0.2% solution ~
0.125% solution)]
|
IN
CASE OF MORE WATER, LESS MIXING RATIO OF HAIRCOAT IS TO BE MIXED.
If you want more effect, you can repeat treatment using the used haircoat solution with/without addition of haircoat.
If you want more effect, you can make & use higher percentage of haircoat solution. |
|
| |
|
| Treatment
by Dipping & Squeezing for 0.5 or some Kgs
of human hair at a time |
 |
 |
Video 02 (filmed in winter)
- Dipping & Squeezing (small q'ty)
|
Video
03 (filmed in winter)
- Dipping & Squeezing (small q'ty)
|
|
For
treating 1 Kg, 2 Kg, up to 5 Kgs of hair in the video 02 & 03,
we mixed (used) as follows;
1) Water (40กษ after hair is put in): 5 Liters (5 Kgs)
2) HairCoat (JK7882-SEV): 25 ml (YOU CAN TRY 15 ML,
OR LESS.)
3) Mixture Ratio: 0.5% [ 25/5000 = 0.005 ( 0.5% solution )]
|
|
| |
 |
and stir the mixture to be mixed evenly not making build-up (pileup) with a hand in a clean disposable glove or a rubber, or a scoop.
To avoid getting the JK-HairCoat on your hands, put on clean disposable gloves or rubber gloves. |
| |
 |
(in case of dipping & squeezing method) dip the hair into the JK-HairCoat solution, massage (stroke, rub) for 3, 4 seconds, and squeeze the hair,
and repeat dipping the hair
and squeezing out the water (solution)
three times, then turn it upside down and
repeat dipping and squeezing 3 times
to ensure that the JK-HairCoat solution reaches the entire hair.
** This work can be done in 10 seconds in total). That is, the ionic bonding will l be done in 10 seconds.
|
|
| |
 |
squeeze out the water (solution) in both direction while taking hair out from the solution |
| |
IF
YOU WANT MORE (THICKER) COATING EFFECT ( AFTER HAIR HAS BEEN
DRIED), YOU CAN TREAT THE HAIR ONE MORE TIME WITH HAIRCOAT SOLUTION. |
| |
When
we would treat another 5 kgs of hair after the above 5 kgs of
hair, we add 15ml of CW7882-SEV to the solution used for the
1st 5 kgs. |
|
|
| The mixing ratio (always or each time) can be different according to hair's conditions (qualities, properties),
what products you will make with the hair in case of raw material bulk hair, softness/silkiness amount(degree) you or your customer request(want), the amount (quantity) of hair to be treated at a time, the size of a container for putting and mixing a HairCoat and water will be mixed, treatment methods (soaking, dipping, rubbing, spraying). |
| |
 |
 |
|
Prepare 50 ml of warm water (40กษ) 500 ml in a container (long enough for hair length) |
|
put a JK-HairCoat, 5 ml into the water (500 ml) in the ratio of 5:500 (1:100) - 1% solution, and stir the mixture with a stirring stick to be mixed evenly without build-ups (pileup) for 10 seconds as fast as possible,
and pout the solution into a sprayer, |
|
spray JK-HairCoat solution to human hairpiece, or a wig placed on a metal or plastic tray, or a styling(rubber) head |
|
have the hair dried in air (natural drying), in a heated room, in an oven (drying machine). |
|
|
|
Please have the dried hair
cooled down for hours.
Please do not touch (pull, stretch, rub, hackle) the hair when the hair is (feels) warm after drying using an oven. |
|
X |
1% solution:
When you use a HAIR SPRAYER for treatment of the HairCoat, please make 1% solution
( 5 ml of a HairCoat : 500 ml of Water).
We call this mixing ratio "1% solution".
You may try 1.5% solution (7.5 ml of JK7882-SEV + 500 ml of water, or 2% solution.
This mixing ratio
is MUCH MORE than 0.3% solution
mentioned in the Use Instructions for Treatent Method A.
(By spraying, all the ions of our hairCoat can not reach even
and enough to every part of
each single strand hair, and a lot of (the ion of) Haircoat
is to be wasted in the air.Therefore, a higher percentage of HairCoat must be mixed with water.) |
Y |
0.3% solution:
When you would treat 3 Kgs (100 gr bundle x 15 pcs), or 5 Kgs of hair at a time by
DIPPING (Video 2, and 3, above),then,
you can use 0.3% solution (3 ml of a HairCoat + 1,000 ml
of Water).
( 1,000 ml of water is to be used in treating 1 Kg of human hair.)
|
Z |
0.05% solution:
In our hair processing (hair-conditioning) by SOAKING/SINKING (Video 1 above,) in a large quantity,
10 Kgs, 20 Kgs of hair at a time, we use 100 grams ( or, 100 ml) of JK7881-SS2
(or, JK7882-SEV) and
50,000 ml (50 liters/50 Kgs) ~ 80 liters
of water in the mixing ratio of 0.04 % solution(20/50,000) ~ 0.125 % solution (100/80,000).
Of course, the mixing ratio has functional relation with the effect you or your customer like, hair propertiese, hair's conditions, etc.
|
|
| |
 |
|
Prepare 50 ml of warm water (40กษ) 500 ml in a container (long enough for hair length) |
|
put a JK-HairCoat, 5ml into the water (500 ml) in the ratio of 5:500 (1:100) - 1% solution, and stir the mixture with a stirring stick to be mixed evenly without build-ups (pileup) for 10 seconds as fast as possible,
and pout the solution into a sprayer, |
|
Place hair extensions or wigs on a tray or a flat plate (table), dampen (wet) a cotton or sponge
with the HairCoat solution, and rub it over the hair, top to bottom. |
|
have the hair dried in air (NATURAL DRYING), in a heated room, in an oven (drying machine). |
|
|
|
Please have the dried hair
cooled down for hours.
Please do not touch (pull, stretch, rub, hackle) the hair when the hair is (feels) warm after drying using an oven. |
| |
 |
|
|
 |
| |
|
|
|
|
Copyright
(C) since 1998 by JohnKorea® Co. All rights reserved.
Cell & WhatsApp : +82-10-8686-1313  |
  |
