 |
 |
Treatment of any of our JK-HairCoat(s) can be accomplished very well when
you have Human Hair washed clean using water and shampoo.
Warm water (50 degrees Celcius) is better than cold water in washing hair.
Please use SILICONE-FREE shampoo. 
For better washing, you can keep the Hair soaked in warm water for 10 minutes
or 30 minutes before washing with Sampoo.
You can enjoy good
& long-lasting effect of HairCoat(s) when you have the hair fully
dried after treatment.
Drying the
hair in an oven makes better (coating) effect than (natural) drying in air.
Using a spin-dryer (hydroextractor, home washing machine) can help you
save drying-time, but HairCoat or the ions of
the HairCoat can be somewhat
removed from the hair during the treated hair is being spin-dried.
If you are not pressed for time (if you are not
busy), we would suggest you should not use a spin-dryer,
but squeeze
the treated hair, and hang out the treated hair on a clothesline
( or place the hair on a net just like the below picture
with a hole size of 5 mm x 5 mm) until 80% of water can drip or drop down.
"80% dry" means hair feels wet but there is no water or solution dripping from the hair.
And then, dry the 80% dried
hair finally in a drying machine (an oven) just like our CW463-FR-0606060
at www.WigMachine.com.
You'd better use a tray/plate with holes in 4 or 5 mm diameter, or made
with metal net (just like mosquito net with holes in 5mm x 5mm).
D-1M. [ Drying with (in) a Drying Machine (oven)
]
(1) Temperature: 80 degrees C.
(2) Drying period (duration): 3 hours or until fully dried
(3) Natural & slow cooling: Please have the dried hair cooled
down slowly in the drying machine for a few hours at least.
Please do
not rub, brush, comb the hair while it is hot or warm.
After dried in an oven and cooled down, the hair is/looks stiff.
Please keep the hair between thumb and fingers, and gently rub or massage the hair.
Then the hair become soft and flexible.
When you do hackling of the dried hair for color blending, size blending, bundle making, etc,
you can spray the haircoat mixture lightly (a little, not to make hair wet)
over the hair for smooth & easy hackling.
Then, you should add(mix) X-ad for better effect. Please text me via WhatsApp if you do not know what X-ad is.
(4) Warning :: Please keep the inside of the oven clean. We can get rid of dust, hair particle with a vacuum cleaner.
When dust gets on hair, hair will feel rough and get tangled.
D2N. [ Natural Drying
] If
you do not have a drying machine (oven), you can dry the hair the natural way.
You can keep (hang out) the 80% dried hair on the (or a) clothesline in
air, or place the hair evenly and thin on a net as below.
Or, you can use
a small room with an electronic heater (hearth) as a drying room.
You can use (place the hair on) (x) an aluminium tray/plate with holes in 5 mm dismeter, 5 mm far from each hole, or (y) a net as below.
(1) Temperature: 20 degrees C is OK, but 30, 40, 50 degrees C are better for maximum coating effects than drying at 20, 30, 40 degrees C.
(Of course, higher temperature up to 80 degrees C. is better if available. )
(2) Drying period (duration): hours, until fully dried
(3) Warning :: Please keep hair out of dust, wind, direct sunlight.
When dust gets on hair, hair will feel rough and get tangled.
Wind will shake and wave hair(s), and eventually hinder(thwart) the very thin (0.005mm) layer of HairCoat formed firmly on the hair cuticle (surface).
Case-1:: If the temperature is 30 degrees C, the drying time should be more
than 15 hours or until fully dried.
Case-2:: In case the temperature is 50 degrees C., the drying time (duration)
should (will) be more than 10 hours.
#Test and get your own formula by checking dryness, temperature, duration, etc.
If you wash or condition the wet hair after treatment with HairCoat (-solution),
the effect will be less and cannot last long time. In a word, full drying
after HairCoat-treatment and before washing, or hair re-conditioning,
ironing, curling secures (creates) good (better) coating effect.
<> Storage
Please keep the Haircoat in the SHADOW (no sunshine) and at a COOL place (not hot place, 5 ~ 15 Degree C.) just like the general storage way for most of chemicals, medicines, or vegetables. Meanwhile, 25 degrees C does not cause serious problem to our HairCoats.
You can keep CW7882-SEV for many months if you do not put Water or any other things into the CW7882-SEV ( or other HairCoats).
Some customers said " no change in quality after 3 years".
Just take out a little bit each time to be mixed with drinkable WATER for each time of usage.
Please DO NOT KEEP HairCoat mixed with Water for next day's use, but for today's use as the mixture will be SPOILED JUST because Water will be spoiled in a day, or days.
CW7882-SEV
in our use instructions can be regarded as the use instruction of CW7881-SS2, CW7885-RST, CW7888-SHN.
It can be regarded as the use instruciton for CW7889-EmC as well, but there is just one thing different, the mixing ratio.
The basic mixing ratios as follows
are for JK7881-SS2, JK7882-SEV, JK7885-RST, JK7888-SHN except
JK7889-EmC.
<> Mixture ratio: 0.3% ~2%, or more
" 1%" means " JK-HairCoat (CW7882-SEV):
Water = 10 grams : 1000 grams"
In case of 1%, we can call the mixture (solution) "1%",
"1%-SEV", or " 1% SEV solution"..
(1) JK-HairCoat (CW7882-SEV)
: Water = 3 : 1000 ( 0.3% solution)
(2) JK-HairCoat (CW7882-SEV) : Water = 5 : 1000 ( 0.5% solution)
(3) JK-HairCoat (CW7882-SEV) : Water = 10 : 1000 ( 1 % solution)
(4) JK-HairCoat (CW7882-SEV) : Water = 20 : 1000 ( 2 % solution)
( It is all
right for you to think "1 gram" is the same as "1 ml"
in case of water and our HairCoats.)
In mixing (making the solution) according the the above 4 kinds(cases)
of ratios, please put 5 or 10 grams of our JohnKorea-HairCoat for each of the
4 cases above.
( Please do not try to put 0.1 gram or 0.3 grams of JK7882-SEV
which are too small amount to weigh, measure, or see.
For example, for the ratio of 1 :: 100 ( 1% SEV solution), please mix (put)
5 or 10 grams of JK7882-SEV and 500 or 1,000 grams of water, not
1 grams of JK7882-SEV and 100 grams of Water.
(
1 gram = 1 ml, or 1 cc in case of water
and our HairCoats, not in case of LEAD, not COTTON )
<AAA-LQ>
Large Quantity Hair Conditioning by SOAKING (IMMERSING)
When you would process (treat) Human Hair in large quantity (1 Kg ,5 Kgs,
10 Kgs or more)
at a time, Please make " 0.3%-SEV" ( CW7882-SEV: Water = 3 grams
: 1,000 Grams )
* The proper Temperature of Water is 40 ~ 45 Degrees C.
In fact, higher temperature of water works better for human hair
itself, but not very high, too hot to your hands.
* The proper amount of Water is as much as the Hair can be submerged under.
That is, if you make a mixture (solution) with 3
grams of JK7882-SEV and 1,000 grams of Water, you can treat 1 Kg (1,000
grams) of Human Hair or 10 pcs of 100 gram-weavons with the mixture.
1. Please prepare a plastic or metal container.
2. And, put Water (2,000 grams) in the container, and put CW7882-SEV (6
grams), and stir round and round to be mixed evenly.
3. Please have the hair dipped
(submerged) under the mixture (solution), and keep it for
5 seconds.
For the 5 seconds, please fumble or knead (massage) quickly the hair evenly
and allover with your hand, or other person's 2 hands keeping the hair
under the mixture.
4. And, take the Hair from the container ( or, the mixture) squeezing
quickly the mixture out of the Hair with a hand,
5. And, have quickly the hair dipped (submerged) in (under) the mixture
again fumbling and squeezing quickly the hair under the mixture for 5
seconds.
6. And, take the hair from the container squeezing quickly the mixture
out of the hair with a hand - same as under 4.
7. You can repeat the steps under 3(5) and 4(6) one time or two times.
8. After Step 6, (squeezing the mixture out of the hair), please have
the hair spin-dried to get rid of about 70% of water (mixture) using a
spin-drying machine (just like your home-washing machine) keeping 30%
of mixture. After spin-drying, you will/must feel wet with the Hair.
9. Have the hair dried completely in the shade.
For better effects, please use a drying machine just like our oven, CW463-DRY
at www.WigMachine.com.
* The mixture can not be effective after 1 time of use. So, for treating
new Hair, please make mixture again.
* Dipping
for seconds or Soaking(Sinking) for minutes) using a (big) container
gives you much better ( coating-) effects than Spraying
because DIPPING, sapecially SINKING makes the solution ( or ions of HairCoat)
evenly delivered to every corner of every strand of hair evenly.
The mixture ratios depend on the condition, quality, texture, amount,
etc of hair to be processed (treated).
It is very important to have Hair or fiber washed off oil, dirt,
and any impurities before applying our John-HairCoat(s).
(Most of Human Hairpieces were treated with
Silicone based oils, etc.
Shampoo in Hair factories or Wig factories, and Rinse or Shampoo used
at homes have Hair coated with silicone oil and others. Such things decrease
the reaction, or the effects of John-HairCoats .
They must be washed off after 1 time of washing or, some times of washing
with water.)
Warm mixture ( 45 Degree C) help the ionic bonding
done better than cold one or very hot one.
OurJohn-HairCoats or the mixture (John-HairCoat
& Water) do not react with plastic containers, nor Water.
John-HairCoats have cation (positive ion) which works together with anion
(negative ion) of Human hair and Synthetic fibers.
1. Please have Hairpieces or Wigs washed with general water before treatment.
2. Put our John-HairCoat(CW7882-SEV) and Water into a metal container in the proper mixture ratio,
3. and, have Hairpieces or Wigs soaked (soused, wetted) in the mixture,
4. and, finger or fumble hairs very quickly (not making the hairs tangled) so that the John-HairCoat can touch all the surface of each single hair evenly.
5. and,dry it.
The treatment ( IONIC BONDING ) is done in several seconds. You can comb hair straight with a wide teeth comb under the mixture (HairCoat solution) in order to have hairs not tangled and have the (positive ions of ) JohnKorea-HairCoat touch each entire strand of hair evenly.
There is not any special requirements in drying or styling the Hairpieces treated with our JohnKorea-HairCoat with one exception that drying should be done in the shade. PLEASE DO NOT USE A BRUSH, but A WIDE TEETH COMB JUST LIKE CW211-WH.
<BBB-SQ> Small
Quantity Hair Conditioning by SPRAYING
When you make mixture (solution) in small amount for SPRAYING on 1 pc
of Wig or Hairpiece, please put more percentage of John-HairCoat to be
mixed with Water than the percentage (amount) of " DIPPING"
under <2> below .
For example, please put 2 grams [or, 1 gram] of CW7882-SEV & 100 grams
of Water to be 2%-SEV [ or, 1%-SEV].
The reason is, the amount of ( ions of ) CW7882-SEV in the (small) sprayer
is of small number to get on surface of hair.>>
1. Please have a Hairpiece washed with
general water, some times if possible.
( More times of washing makes better effect !! )
2. Please make solution(John-HairCoat & Water) in the mixture ratio
( we did or will quote, or you like),
3. and put the mixture (solution) in a sprayer,
4. and spray the mixture (solution, John-HairCoat conditioner) to Hairpieces
or Wigs.
You can rub lightly and quickly each single (strand of) Hair of the Hairpiece
or Wig with your thumb and fingers while spraying in order to have the
mixture put onto allover the surface of hair evenly.
You can brush or comb the Hair fumbling and fingering with fingers.
In several seconds after having Hair treated
by spraying the John-HairCoat solution, the treatment ( Ionic Bonding)
will be done.
The (coating) effect is not changed when (after) washing, shampoo, and
rinsing.
MEANWHILE, IF YOU WANT TO DO IRONING,
PLEASE APPLY THE HAIRCOAT SOLUTION AFTER IRONING by spraying, OR 2 TIMES
- BEFORE IRONING AND AFTER IRONING.
<<<<<
Q & A >>>>>
Q&A:
CUSTOMERS' QUESTIONS AND OUR ANSWERS ARE HERE.
Q-01: Mixture ratio ?
John: I would ask you to make mixture(solution) in 3 kinds of mixture
ratios for your tests.
(1) John-HairCoat (JK7882-SEV) : Water = 3 : 1000 ( 0.3% SOLUTION)
(2) John-HairCoat (JK7882-SEV) : Water = 5 : 1000 ( 0.5% SOLUTION)
(3) John-HairCoat (JK7882-SEV) : Water = 10 : 1000 ( 1 % SOLUTION)
(4) JK-HairCoat (JK7882-SEV) : Water = 20 : 1000 ( 2 % SOLUTION) - good
for Treatment by spraying
In mixing ( making the solution) according the the above 3 kinds of
ratios, please put 5 or 10 grams of our John-HairCoat for each of the
3 cases above.
( Please do not put 1 gram or 3 grams of JK7882-SEV which are too small
amount to weigh, measure, or see.
For example, for the ratio of 1: 100 (1%), please mix (put) 10 grams(or
ml) of JK-HairCoat JK7882-SEV ( neW product code of CW7882-SEV) and 1,000 grams of water, not '1 gram
(or ml) of JK7882-SEV and 100 grams of Water'.
( 1 gram = 1 ml, or 1 cc in case of water
and our HairCoats, not LEAD, not COTTON )
Q-02: "
Do I spray it on wet hair or dry hair?"
John: You do both ways. Theoretically, the water of wet hair may reduce
a little the mixture ratio of our JohnKorea HairCoat. But, it does not
matter that much.
Q-03: " How much JohnKorea HairCoat (Permanent HairCoat, P-HairCoat) do I spray on the toupee? Should I fully wet the toupee with P-HairCoat? "
John: Just spray John-HairCoat mixture ( John-HairCoat conditioner, John-HairCoat solution) made by you one time on hair of a Toupee. Or, you can have a toupee soaked ( wetted) in the P-HairCoat mixture in a container.
This way (soaking, dipping) will make more Ionic Bonding on the hairs than spraying.
When we do Acid treatment, Bleaching, Dyeing on Human hairpiece to make Hairpiece in Bulk or Weft which are used in make Human Hair extension by braiding or weaving, we put the P-HairCoat (CW7882-SEV) to water in the ratio of 3: 1000 .
For example, when we would process (hair-condition) 10 Kgs of Human hair at a time, we put in 100 gr(ml) of CW7882-SEV and 50 Kgs (50,000 gr) of warm water in a big plastic container (0.2% solution).
In case of 5 Kgs of water, we put 25 ml of CW7882-SEV (0.5% solution) to treat 1 ~ 2 Kgs of human hair, and stir up the mixture evenly, and dip (soak) 10 Kgs of Human hair in the mixture.
When you have hair dipped (wetted), please fumble ( finger, kneed, massage ) the hair with fingers quickly and comb the hair in the mixture not to be tangled and treated evenly with the mixture (HairCoat solution).
If you use warm water (40 Degree C ~ 45 Degreee C) in making the HairCoat mixture, the Ionic bonding will be done more better.
Q-04: " How long do I leave the hair conditioner soaking onto the hair of the toupee? Should I leave it on for 5 minutes or 30 minutes? "
John: Just 10 seconds is enough. Leaving it on for 5 minutes or 5 hours does not make any problem, but it may take your valuable time ( or your customer's time).
Q-05: "Do I rinse the hair coat off with water or let it dry on the toupee? "
John: After treating Hair or a Toupee with the John-HairCoat mixture by spraying, or soaking (dipping), just leave the hair or Toupee dried in the shade. Or, you can have it dried using a hair dryer with (cold air or) warm air.
You do not need to wash off the Hair coat mixture from the hair or Toupee because the amount of John-HairCoat is too small ( 0.3%, 1 %, or 4% ).
If you want to, you can rinse or shampoo the hair !! Then, the hair will feel the effect of the rinse or shampoo additionally.
Q-06: Thank you for shipping CW7882-SEV. I have a question, do I need to purchase any other John-HairCoat ? What would be the benefit of having the other human hair coat to use with this one (CW7882-SEV)?
John: All of our John-HairCoats have "Tangle-free effect.
Meanwhile if you have damaged, over-processed, or weak hair ( specially Indian Hair), you can make a good change with our CW7885-RST.
Many overseas customers buy CW7882-SEV and CW7885-RST at the same time.
When you use or apply the 2 kinds of HairCoats (or John-HairCoats), you can treat hair as follows;
(1) Please wash ( shampoo) the hair with water to get rid of Oil, Sweat, Dust, etc.
(2) and treat it with CW7885-RST at first ( after drying it if possible)
(3) and in 10 seconds, 1 minute, 10 minutes, 1 hour, or 1 day, wash it again with water ( or water and shampoo), and dry it ( if possible), and apply CW7882-SEV on the hair.
Or, you can have CW7882-SEV and CW7885-RST mixed at a time in the ratio of 1:1 in to total to be 3% of the whole mixture;
CW7882-SEV: CW7885-RST: WATER = 1.5 ml:1.5 ml:1,000 ml (or, 3 ml : 3 ml : 2,000 ml)
For example, please make mixture for treating 2 Kgs ( 2 000 gr, 2,000 ml, 2 Liters ) of HAIR as follows;
......... Water(2,000 gr), CW7882-SEV(3 gr) and CW7885-RST( 3 gr)
Washing or cleaning hair to get rid of oil, dust, dirt, sweat, etc from hair makes much better effect of John-HairCoats.
IT TAKES 10 SECONDS THE CHEMICAL REACTION IS DONE (FINISHED).
After then, you can do washing, shampooing, rinsing with hot water, and drying for styling with hot air because such things do not change the effects of John-HairCoats.
Q&A: ONE CUSTOMER'S QUESTIONS AND OUR ANSWERS ARE HERE.
Q-11. The hair is usually tied in 4 oz. bundles, do I untie the bundles and spray the HairCoat
or can I keep the hair tied in bundles and spray from top to bottom?
<John> If you spray the HairCoat-Mixture on the hair when it is tied, the HairCoat-mixture
will not reach the part of the hair where it is tied.
Q-12. Should the hair be sprayed when wet?
<John> The best is when the hair is dry, or the second best is when the hair is a little wet.
Q-13. After I spray, I should just let hair dry with HairCoat, no need to rewash hair? correct?
< John> No. No rewashing.
Please have the hair dried (in a hot oven or by hanging out in warm air) after spraying the HairCoat solution on it. And you can re-wash the hair if you have any reason to re-wash it.
Heat-drying (high temperature of drying, 80 degree Celsius, 1.5 hours as minimum) will make more better effect of coating ( or filming, conditioning) on the hair ( than drying in warm air or drying at low temperature..
Q-14. What is good temperature to dry the hair with the HairCoat for maximum effect?
Or just leave in the sun and let hair air dry?
<John> It is 80 Degree C.( in case of Human hair). The proper time (period) is 1.5 hours or 3 hours.
Or, if you do not have any drying oven, please leave the hair in the shade to be dried for over 10 hours
at over 30 degree C.. Over 40 degree C is better than 30 degree C..
AFTER QUESTIONS AND MY ANSWERS ABOVE, THE CUSTOMER ASKED ANOTHER QUESTIONS AS FOLLOWS;
Q-21: First wash the hair I would like to treat in water (or maybe wash it with a deep-cleanser-shampoo ? Is that better than only water? )
<John>: Yes. Making hair off dirt, oil, and any thing is good for better coating (filming, attaching) of our HairCoat (John HairCoat). Meanwhile, please use SILICONE-FREE shampoo if possible.
Q-22. Let the hair dry before treat ?.
< John > : Drying is better. But, not that much necessary. Just have hair not much wet ( not having lots of water on it). "Too much wet " means the percentage of HairCoat will be less owing to the amount of the water on the hair.
Q-23. Fill a bucket with 10 Liters of warm water (1 Liter = 1000 gram) and then put in 0.5 dl (50 gram) of HairCoat (the HairCoat , CW7882-SEV) and then mix all together. Then I can treat for example 1 Kg of hair in that mixture? Is it correct?
<John > Yes. You are right.
Meanwhile, 10,000 grams of Water & 50 grams of HairCoat is too much for treating 1 Kg only (supposing the hair length is 18 inches).
Please (you can) have 0.1 Kgs ( 1 pc of hair extension or a wig), 0.3 Kgs ( 3 pcs of weavons) treated at a time by dipping (which you can hold with one hand) for about 10 seconds (quickly) and do the same work 10 times, totally 1 Kg or 3 Kgs.
PLEASE SEE OUR VIDEOS at www.HairCoat.com on a desktop computer.
The videos will not play on a smart phone.
Q-24. Dip/soak the hair and finger or fumble hairs very quickly (not making the hairs tangled) so that the HairCoat conditioner can touch all the surface of each single hair evenly. Maybe brush hairs in the mixture too.
<John >: Yes. OK.
Meanwhile, just for information. we do not do brushing because it takes time.
The treatment can be ( or should be done) in 10 seconds. (The ionic bonding is to be done in 10 seconds.) You do not need to give treatment to hair for 30 seconds, 1 minute, or a longer time.
Q-25. Then let it dry complete (I don't have a big oven..but maybe the kitchen-oven will work if I have it on 70 degree Celsius?? hehe). But I will be careful so the nail-keratin don't melt.
<John>: 70 degree C is good temperature for drying haircoat-treated hair.
The drying time should be 2 hours as minimum if (in case) you can remove much water from haircoat-treated hair before putting the hair into the kitchen-oven.
You can hand out the hair (on the clothsline) in the shadow until water does not drop from the hair, and put the hair into the kitchen-oven. Then, 2 or 3 hours of drying time can be enough.
If you do not use such a oven or any kind of oven and a spin-dryer, you can not avoid drying the hair by handing out the hair in air ( if possible, inside of your workshop keeping off dust).
The temperature of the room or your workshop should be over 30 C, or higher (by heating with a heater or a stove).
For extra information, there is another kind of Keratin material ( for example, our G195-D) which does not melt at even 100 degree Celsius.
Q-26. Then repeat from "step 1 - step 5" with the CW7882-SEV. Is it correct to have the same ration that I have with the restoration ? 10 Liter water and 0.5 dl HairCoat?)
<John > YES. Meanwhile, I would correct what you said again; "10 Liter water and 0.5 dl HairCoat" should be saying " 1 Liter ( not 10 Liters) of water and 50 grams of HairCoat".)
< John> Please use 5 grams of HairCoat to be mixed with 1,000 grams of water, and have test-treatment with 100 gr or 1,000 gr of hair.
You can have (use) another 5 gr of HairCoat for another test. Please do not put 50 gr at (for) the first test. I mean to tell you to save HairCoat so that you can have several times (different conditions) of tests.
( "5 gr of HairCoat in 1,000 (5 gr X 200) grams of water [CASE A] "
and " 50 gr of HairCoat in the water of 10,000 (50 gr X 200) grams of water [CASE B]" are the same mixture ratio theoretically. But the [CASE A] makes less coating effect on hair than [CASE B].
So, for your test using small amount of HairCoat , I said " Please use 5 gr of our HairCoat to be mixed with 1,000 gr of water,... .".
JUST MAKE (HAVE) ACTIONS ( TESTS) TO HAVE YOUR OWN WAY (FORMULA).
| Q & A -2 | ||||||
| Meanwhile, we are posting
Questions of our customers & our Answers and the Application cases of other users on the job sites in many countries (different weather, different
origins of human hair)
hoping you will have enough information, and have/find) your own FORMULA
(RECIPE) for various
conditions & characteristics of human hair products. PLEASE DO NOT FEEL DIFFICULT OR COMPLICATE (AFTER/WHILE) READING THE BELOW INSTRUCTION AND THE LINKED WEB PAGES. The main & basic use instruction is what mentioned above. |
||||||
Ans. JohnKorea HairCoat does not cause any problems in bleaching or dyeing hair. |
||||||
Ans. JohnKorea HairCoat applied to the top part of hair to be inserted into the hard ring can cause problem that the hair may slip out of the hard ring. So please do not apply HairCoat to the top part about 1 cm at the top of the hair. |
||||||
Ans. JohnKorea HairCoat, CW7882-SEV is helpful. |
||||||
Ans. JohnKorea HairCoat, CW7882-SEV is helpful in making hair SILKY STRAIGHT. |
||||||
Ans. JohnKorea HairCoat, CW7882-SEV does not cause problems with curl-making, does not block heat conduction, but rather helps. |
||||||
[[ WARNING ]] Meanwhile, after then, when you start to
dry the HairCoat-treated Human hair(-pieces) in air, please KEEP
the hair NOT |
||||||
|
[[ VERY IMPORTANT TECHNICAL TIPS ]] Even though this information is mentioned above, but, I am posting the below technical tips here below. The below is Q & A exchanged recently between a new customer and me. AA: Can you please email me clear instructions how to use the hair coat because I do not think it is working. A1. Please have your hair in warm water
(45°C) and leave the hair in the warm water for 10 minutes BB. After I put the hair in the hair coats do I wash it? What do I do ? No. No washing, but drying ! After you have your hair(-piece) treated with our HairCoat, YOU SHOULD HAVE THE HAIR FULLY DRIED AT HIGH TEMPERATURE (80 degree C.) FOR BETTER AND LONGER PERIOD OF COATING EFFECTS. |
||||||
| [[ THE BELOW INFORMATION IS POSTED AT WWW.HAIRCOAT.COM
, BUT IN A DIFFERENT FORMAT.]] (S01) IF YOU THINK HAIR IS DAMAGED OR WEAKENED, PLEASE USE CW7885-RST. Lightest colors of hair, Indian hair can be (more) damaged or weakened than dark colors of hair. (S02) IF YOU WANT DAMAGED HAIR LOOK SILKY,
PLEASE USE CW7885-RST (and then, if possible please ** WHEN APPLY 2 HAIRCOATS ONE BY ONE( S02,
S03, S04 ) TO A HAIRPIECE OR A WIG, YOU CAN USE (S03) IF YOU WANT DAMAGED HAIR FEEL SMOOTH,
SOFT, EMOLLIENT, IF YOU THINK YOU HAIR IS NOT DAMAGED/WEAKENED, PLEASE USE (S051) CW7889-EmC for SOFTNESS (S052) CW7882-SEV for SILKY-LOOK & SILK-TOUCH; or (S053) CW7888-SHN for MORE SHINE. (S054) If you do not want SHINE, SILKY-LOOK,
but SOFT-TOUCH & DULL-LOOK, please use |
||||||
RE: MIXTURE RATIOS FOR JOHN KOREA HAIR COATS QUESTION: How many Kgs of hair can be treated with
35 ml of a HairCoat (for example, CW7882-SEV)? 35 ml can be mixed with 35 ml/3 (= 11.66) x 1,000
ml of water, 11,666 ml of water. When you have 11.7 Kgs of mixture (solution),
you can have 11.7 Kgs of Human hair treated,
In case of small amount of hair such as 100 gram ( 1 pc
of weft or a wig ), 1 Kg, we count in the amount But, in case we treat large quantity of hair at a time,
we do not consider the amount of water. We just use |
||||||
|
If possible, please try to have
test-treatments many times before asking questions for good Q&A. Just for your creating your own formula, please do tests. |
||||||
Copyright© since 1998 by JohnKorea® Co.. All rights reserved. Tel(Cell of John Yim) : +82-10-8686-1313  |
