(A-1) SINKING (IMMERSING-01) for 10 ~ 20 Kgs in a 50 liter or 100 liter container; or 100 gr ~ 200 gr in a 1 liter container,
or (A-2) DIPPING & SQUEEZING (02, 03) for 100 gr ~ 300 gr each dipping & squeezing, x 5 pcs , 10 pcs, 20 pcs
( If the effect is not enough, please try the treatment one more time using the used solution.)

To treat 1 kg of hair or 100 gr hair extension x 10 pcs, Please make solution by mixing 3 ml of a haircoat and 1,000 ml of water to put into a sprayer.
We call this mixing ration 0.3% solution.
Your hair may need 1% solution when you treat very small amount of hair, 1 pc of hair or 1 pc of topper.
If you want to treat some or several kgs of hair at a time, you can use a lower mixing ratio of the solution as follows:

Treatment by Sinking (Immersing, Soaking some Kgs or 10 Kgs of human hair at a time for 10 seconds, a few minutes, or 24 hours
with lower mixing ratios
Treatment by Dipping & Squeezing Method
for 0.5 or some Kgs, 100 gr pc x 10 pcs (10 times)
of human hair at a time, reating each pc (bundle) for 7 ~ 10 seonds

For treating 10 Kgs in the video 01, we used ( mixed) as follows;
1) Water: 30 Liters (30 Kgs)
2) HairCoat(CW7882-SEV): 60 ml (60 gr)
3) Mixture Ratio: 0.2%
([ 60/30000 = 0.002 (0.2% Solution)]

If we use 50 Liters of water, we put (mix) 100 ml of a HairCoat for treating 10 Kgs or more of hair.

For treating 20 Kgs of hair with a solution
1) Water: 50 or 80 Liters
2) HairCoat : 100 ml (100 gr)
3) Mixture Ratio: 0.2 ~ 0.125%
[ 100/50000 ~ 100/80000 = 0.002 ~0.00125 (0.2% solution ~ 0.125% solution)]

IN CASE OF MORE WATER, LESS MIXING RATIO OF HAIRCOAT IS TO BE MIXED.
If you want more effect, you can repeat treatment using the used haircoat solution with/without addition of haircoat.
If you want more effect, you can make & use higher percentage of haircoat solution.

For treating 1 Kg, 2 Kg, up to 5 Kgs of hair in the video 02 & 03, we mixed (used) as follows;
1) Water: 5 Liters (5 Kgs)
2) HairCoat (CW7882-SEV): 25 ml (YOU CAN TRY 15 ML, OR LESS.)
3) Mixture Ratio: 0.5% [ 25/5000 = 0.005 ( 0.5% solution )]
IF YOU WANT MORE (THICKER) COATING EFFECT ( AFTER HAIR HAS BEEN DRIED), YOU CAN TREAT THE HAIR ONE MORE TIME WITH HAIRCOAT SOLUTION.
When we would treat another 5 kgs of hair after the above 5 kgs of hair, we add 15ml of CW7882-SEV to the solution used for the 1st 5 kgs.
 



You can spray the solution (mixture) on wigs, hairpieces with a sprayer, and have the treated hair dried.

Please make solution by mixing 5 ml of a haircoat and 500 ml of water to put into a sprayer.

We call this mixing ration 1% solution.

X

1% solution:
When you use a SPRAYER for treatment of the HairCoat, please make 1% solution
( 5 ml of a HairCoat : 500 ml of Water).

We call this mixing ratio "1% solution.

This mixing ratio is MUCH MORE than 0.3% solution mentioned in the Use Instructions for Treatent Method A.

(By spraying, all the ions of our hairCoat can not reach even and enough to every part of
each single strand hair, and a lot of (the ion of) Haircoat is to be wasted in air. So, more percentage
of HairCoat should be mixed with water.)
Y

0.3% solution: When you would treat 3 Kgs (100 gr bundle x 15 pcs), or 5 Kgs of hair at a time by DIPPING (Video 2 and 3 above),
then, you can use 0.3 solution (3 ml of a HairCoat + 1,000 ml of Water).

( 1,000 ml of water is equal to 1 Kg of Water.)
Z

0.2% solution: In our hair processing (hair-conditioning) by SOAKING/SINKING (Video 1 above) in a large quantity,
10 Kgs, 20 Kgs of hair at a time, we use 100 grams ( or, 100 ml) of CW7881-SS2 (or, CW7882-SEV) and
50,000 ml (50 liters/50 Kgs) ~ 80 liters of water in the mixing ratio of 0.2 % solution(20/50,000) ~ 0.125 % solution (100/80,000).

Of course, the mixing ratio has functional relation with the effect you or your customer like, hair propertiese, hair's conditions, etc.



You can do tapping (rubbing) with a sponge or cloth, placing hair on a flat table or tray.
Copyright (C) since 1998 by JohnKorea® Co. All rights reserved.
Mob & WhatsApp : +82-10-8686-1313