Just prepare Water(40กษ) in a container, and
Put a HairCoat mixed in the ratio of 1000 : 3 ( or more )
(ex, 1000 grams or ml of Water warm - 40กษ) and 3 grams or ml of a HairCoat ), and
Have Human hair(-piece) soaked just like Video 01, below for 10 seconds, some minutes, 1 hour, 10 hours;
or dipped for 5 seconds and squeezed x 2 or 3 times just like Video 02 ,or 03, ,.
Have the hair dried.
Please have the dried hair cooled down for hours.
** Please do not touch ( rub, hackle) the hair when the hair is (feels) warm.

Treatment by Sinking (Immersing, Soaking some Kgs or 10 Kgs of human hair at a time for 10 seconds, 10 minutes, or 10 hours
Treatment by Dipping & Squeezing Method
for 0.5 or some Kgs, 100 gr pc x 10 pcs (10 times)
of human hair at a time, treating each pc (bundle) for 7 ~ 10 seonds

For treating 10 Kgs in the video 01, we used ( mixed) as follows;
1) Water: 30 Liters (30 Kgs)
2) HairCoat(CW7882-SEV): 60 ml (60 gr)
3) Mixture Ratio: 0.2%
([ 60/30000 = 0.002 (0.2% Solution)]

If we use 50 Liters of water, we put (mix) 100 ml of a HairCoat for treating 10 Kgs or more of hair.

For treating 20 Kgs of hair with a solution
1) Water: 50 or 80 Liters
2) HairCoat : 100 ml (100 gr)
3) Mixture Ratio: 0.2 ~ 0.125%
[ 100/50000 ~ 100/80000 = 0.002 ~0.00125 (0.2% solution ~ 0.125% solution)]

IN CASE OF MORE WATER, LESS MIXING RATIO OF HAIRCOAT IS TO BE MIXED.
If you want more effect, you can repeat treatment using the used haircoat solution with/without addition of haircoat.
If you want more effect, you can make & use higher percentage of haircoat solution.

For treating 1 Kg, 2 Kg, up to 5 Kgs of hair in the video 02 & 03, we mixed (used) as follows;
1) Water: 5 Liters (5 Kgs)
2) HairCoat (CW7882-SEV): 25 ml (YOU CAN TRY 15 ML, OR LESS.)
3) Mixture Ratio: 0.5% [ 25/5000 = 0.005 ( 0.5% solution )]
IF YOU WANT MORE (THICKER) COATING EFFECT ( AFTER HAIR HAS BEEN DRIED), YOU CAN TREAT THE HAIR ONE MORE TIME WITH HAIRCOAT SOLUTION.
When we would treat another 5 kgs of hair after the above 5 kgs of hair, we add 15ml of CW7882-SEV to the solution used for the 1st 5 kgs.
 
 



You can spray the solution (mixture) on wigs, hairpieces with a sprayer, and have the treated hair dried.

Please make solution by mixing 5 ml of a haircoat and 500 ml of water to put into a sprayer.
We call this mixing ration 1% solution.

Just prepare Water (warm - 40กษ) in a container..
Put a HairCoat into the water in the sprayer in the ratio of 1000 : 3 ( 0.3% solution), or more
(ex, 1,000 grams or ml of Water and 3 grams or ml of a HairCoat, and stir the mixture to be mixed evenly
Place human hair (-piece) or a wig on a metal or plastic tray, or on a styling (rubber) head, spray the solution onto the hair.
 Have the hair spin-dried with a spin dryer, and have the hair dried in a drying machine (80กษ. for 3 hours or until thehair become fully dried, spread (a bundle of) hair strands evenly thin on a plate before putting it in a drying machine (oven). please keep (specially the root or top part of) the hair strands straightened, not bent, not wavy by rubbing with a wet towel.
Please have the dried hair cooled down for hours.
** Please do not touch ( rub, hackle) the hair when the hair is (feels) warm.

X

1% solution:
When you use a SPRAYER for treatment of the HairCoat, please make 1% solution
( 5 ml of a HairCoat : 500 ml of Water).

We call this mixing ratio "1% solution. You may try '2% solution'.

This mixing ratio is MUCH MORE than 0.3% solution mentioned in the Use Instructions for Treatent Method A.

(By spraying, all the ions of our hairCoat can not reach even and enough to every part of
each single strand hair, and a lot of (the ion of) Haircoat is to be wasted in the air.Therefore, a higher percentage of HairCoat must be mixed with water.)
Y

0.3% solution: When you would treat 3 Kgs (100 gr bundle x 15 pcs), or 5 Kgs of hair at a time by DIPPING (Video 2, and 3, above),then, you can use 0.3% solution (3 ml of a HairCoat + 1,000 ml of Water).

( 1,000 ml of water is to be used in treating 1 Kg of human hair.)
Z

0.05% solution: In our hair processing (hair-conditioning) by SOAKING/SINKING (Video 1 above,) in a large quantity,
10 Kgs, 20 Kgs of hair at a time, we use 100 grams ( or, 100 ml) of CW7881-SS2 (or, CW7882-SEV) and
50,000 ml (50 liters/50 Kgs) ~ 80 liters of water in the mixing ratio of 0.04 % solution(20/50,000) ~ 0.125 % solution (100/80,000).

Of course, the mixing ratio has functional relation with the effect you or your customer like, hair propertiese, hair's conditions, etc.
 


Just prepare Water (warm - 40กษ) in a sprayer, and
Put a HairCoat into the water in the sprayer in the ratio of 500 : 5 in case of 1% solution, or more
(ex, 500 grams or ml of Water and 5 grams or ml of a HairCoat ), and stir the mixture to be mixed evenly
Place hair extensions or wigs on a tray or a flat plate (table), dampen (wet) a cotton or sponge
with the HairCoat solution, and rub it over the hair, top to bottom.
 Have the hair spin-dried with a spin dryer to remove 80% of water ( or solution) out of the hair,
and put the hair in a drying machine (80 degree C. for 3 hours or until thehair become fully dried.

Spread (a bundle of) hair strands evenly thin on a plate before putting it in a drying machine (oven).
Please keep (specially the root or top part of) the hair strands straightened, not bent, not wavy
by rubbing with a wet towel.
Please have the dried hair cooled down for hours.
** Please do not touch ( rub, hackle) the hair when the hair is (feels) warm.
 
Copyright (C) since 1998 by JohnKorea® Co. All rights reserved.
Cell & WhatsApp : +82-10-8686-1313